This is one
module of the
The following revisions of the MBino exist:
The MBino is an Arduino® compatible
processor board and can be plugged into a MakerBus.
The MBino has the following features:
The MBino has the same physical size and
characteristics as an Arduino® Uno.
This includes exact board shape, mounting holes,
connector placement, etc. The only difference is
that the MBino does not have a USB B connector.
Instead of a USB B connector, the MBino has a
3-pin connector that is compatible with FTDI
TTL-232R-3V3 3.3V FTDI USB to 6-pin serial
The MBino has an AVR ATmega324 proecessor instead
of an AVR ATMega328. The ATmega324 has 2 UART's,
one of which is used by the Arduino IDE and
the other which is dedicated to the MakerBus.
The MBino is has a bootloader that is compatible
with the Arduino IDE.
All shield boards that that are designed to work
with the Arduino Uno will work with the MBino.
The MBino can be physically reset from the MakeBus.
(implemented in upcoming Rev. C), not Rev. B.
Copyright 2013 by
Wayne C. Gramlich>.
All rights reserved.