This is revision A of the ICSP board. It is part of the Robus project.

Icsp (Revision A)

Introduction

The ICSP board is a board used to perform In-Circuit Serial Programming via an asynchronous serial line. The connection to the host occus using an FTDI 3.3V USB to 1×6 header. A 1×5 header is connected to the device to be programmed. There is a [Reset] button and a [Program] button.

Design

The following images are available in the in PS and SVG formats:

• Circuit Schematic (PS format) (SVG format)
• PCB Back Layer (PS format) (SVG format)
• PCB Front Layer (PS format) (SVG format)
• PCB Front Silk Screen Layer (PS format) (SVG format)
• Archives (.tar.gz format) (.zip) format)